title-bar.jpg (6912 bytes)
Company ProfileOur ProjectsProducts & ServicesResource CenterWhat's NewOnline Form
Site Map
Contact Information
Back To Home
In-Situ Gas Analysis(6180 bytes)
(6572 bytes)
(6601 bytes)
(5978 bytes)
(6419 bytes)
blue.jpg (4801 bytes)FLOWSIC 100 PxD
blue.jpg (4801 bytes)FLOWSIC 100 UxD
blue.jpg (4801 bytes)FLOWSIC 100 USD PR
blue.jpg (4801 bytes)FLOWSIC 100 PN16/EX
blue.jpg (4801 bytes)FLOWSIC 150
blue.jpg (4801 bytes)FLOWSIC 600
(6714 bytes)
(6643 bytes)
(6281 bytes)
(6035 bytes)
prodserv12.jpg (1475 bytes)
(6415 bytes)
(6843 bytes)
indexad1.jpg (13643 bytes)

Copyright ©1998-2005:
AMKO Systems Inc.
All rights reserved.

fl106.jpg (9530 bytes)
The FLOWSIC 100 Series from SICK is designed to conduct direct and non-contact measurements of gas velocities and volumetric flows without the need for interfering installations in the duct. With a broad range of device models SICK offers the solution for a variaty of measurement tasks

Operating principle:

Ultrasonic convertors are mounted on both sides of the gas duct at an angle to the direction of flow. These convertors alternately transmit and receive sound pulses in and against the direction of the gas flow. FLOWSIC measures the propagation time delay of the pulses and uses this to calculate the velocity of the gas - independant of the local pressure and temperature conditions.

Advantages at a glance:

Direct and instantaneous measurements in the process thanks to non-contact ultrasound measuring technique
Measuring results are independent of pressure and temperature
Recording of gas temperature and volumetric flow rate
Easy to install and extremly reliable with low maintenance requirements
Flexible, user-friendly parametrization with MEPA software

Available versions:

FLOWSIC 100 PxD (with purge air)
FLOWSIC 100 UxD (without purge air)
FLOWSIC 100 USD PR (single-probe version)
FLOWSIC 100 UMx PN16/EX (high pressure & explosion-proof)
FLOWSIC 150 (automotive exhaust flow measuring)
FLOWSIC 600 (pipeline flow monitoring)