Copyright ©1998-2004:
AMKO Systems Inc.
All rights reserved.
FLOWSIC 101 - Standard Device
For gas ducts with low dust content and small duct diameters.
Applications:
 |
Power stations |
|
Chemical industry |
|
Waste incineration plants |
|
Steel industry |
|
Cement plants |
|
Food industry |
|
Glass industry |
Advantages:
|
Withstands high temperatures of up to 400 °C |
|
High accuracy of ±0.1m/s |
Technical Specifications:
| Measuring path | 0.5 ... 3 m |
| Measuring range | 0 ... 40 m/s |
| Gas temperature | 0 ... 400 °C |
| Accuracy (v, T) | ±0.1 m/s; ±3 °C |
| Duct pressure | -70 ... +70 mbar |
| Dust concentration | max. 1 g/m3 |
| Purge-air supply | required |
| Cable length | max. 1000 m |
| Conformity | TÜV, Fed. German Pollution Control Act (13th/17th Implementing Ordinance), German Clean Air Regulations, US EPA |
FLOWSIC 102 - For large measuring paths
For gas ducts with high dust content and large duct diameters.
Applications:
|
Chemical industry |
|
Waste incineration plants |
|
Steel industry |
|
Cement plants |
|
Food industry |
|
Glass industry |
Advantages:
|
Supports measuring paths up to 13 m |
|
For measurements with dust concentrations of up to 10 g/m3 |
Technical Specifications
| Measuring path | 2.0 ... 13 m |
| Measuring range | 0 ... 40 m/s |
| Gas temperature | 0 ... 400 °C |
| Accuracy (v, T) | ±0.2 m/s; ±3 °C |
| Duct pressure | -70 ... +70 mbar |
| Dust concentration | max. 10 g/m3 |
| Purge-air supply | required |
| Cable length | max. 1000 m |
| Conformity | TÜV, Fed. German Pollution Control Act (13th/17th Implementing Ordinance), German Clean Air Regulations, US EPA |
