Copyright ©1998-99:
AMKO Systems Inc.
All rights reserved.
EVA LAB ANALYSIS SYSTEM
Today’s analytical lab is faced with continuous growth in number and type of analyses. Most lab analyzers cannot meet this challenge; they are geared to performing specific tasks. Lacking flexibility, they are unable to meet continuously changing analytical demands.
The EVA system’s modular design, however, expands the horizons of analytical chemistry. Varied combinations of stand-alone EVA units give you flexible, user-specific, expandable system configurations.
EVA Modules:
EVA-Master - incorporates a data processor, controller and detector. Changing to a new detection method is as simple as changing the drawer in the Master module.
EVA-Manifold - for method-specific chemical/physical processes such as mixing and reaction of samples and reagents, dispersion, reduction, gas diffusion and extraction.
EVA-Injector - an 8-port rotary inject valve, easily programmed with injection volume, load/inject intervals, dual injection of different volumes and random access to ports.
EVA-Pump - peristaltic pump with integrated microprocessor transfers sample, reagent and carrier. Pump functions can be programmed quickly and easily, e.g. pumping intervals, flow rate and output volume, flow direction, on/off switching of the pump channels and gradients
EVA-Selector - programmable 8-port diverter valve, responsible for multi-point selection for on-line analysis, switching from samples to standards and introduction of different reagents
EVA-Sampler - with up to 114 positions for samples and calibration standards. The system operates unattended when controlled by the EVA-Pump, EVA-Injector, EVA-Selector or EVA-Master.
