title-bar.jpg (6912 bytes)
Company ProfileOur ProjectsProducts & ServicesResource CenterWhat's NewOnline Form
Site Map
Contact Information
Back To Home
In-Situ Gas Analysis(6180 bytes)

(6572 bytes)
(6601 bytes)
(5978 bytes)
(6419 bytes)
(6714 bytes)
(6643 bytes)
(6281 bytes)
(6035 bytes)
prodserv12.jpg (1475 bytes)
(6415 bytes)
(6843 bytes)
indexad1.jpg (13643 bytes)

Copyright ©1998-2004:
AMK Systems Inc.
All rights reserved.


GM 950 INSTANTANEOUS CO SENSOR SYSTEM

iso9001.jpg (10454 bytes)gm950.jpg (16107 bytes)
Measurement of rapid CO concentration peaks.

Due to its low response times, the GM950 can record CO peaks even at high concentrations and measuring value dynamics. Dust concentrations of up to 200 g/m3 are also not a problem.

Application:

Cement industry for explosion protection in electrostatic filters

Advantages:

Representative measuring values thanks to redundant sensors
Direct CO measurement
Easy to install, start up and maintain
Measuring values can be checked and calibrated locally using reference gases
Short response times <2s (typically 1s)

Technical Specifications

System components 2 in-situ CO sensors, sampling probe, analysis cabinet, evaluation unit
Measurment principle Automatically calibrated voltage probes (ZrO2)
Measurementvariable/
Measurement range		 CO: 0.1 ... 5 %vol.
Interfaces RS 232, RS 422/485
Enclosre rating Analysis cabinet IP 54, evaluation unit IP 65
Test function Automatic self-test