title-bar.jpg (6912 bytes)
Company ProfileOur ProjectsProducts & ServicesResource CenterWhat's NewOnline Form
Site Map
Contact Information
Back To Home
In-Situ Gas Analysis(6180 bytes)

(6572 bytes)
(6601 bytes)
(5978 bytes)
(6419 bytes)
(6714 bytes)
(6643 bytes)
(6281 bytes)
(6035 bytes)
prodserv12.jpg (1475 bytes)
(6415 bytes)
(6843 bytes)
indexad1.jpg (13643 bytes)

Copyright ©1998-2004:
AMK Systems Inc.
All rights reserved.

insitu-gm500.jpg (11590 bytes)


GM 500 H2O and CO2 CONCENTRATION MONITOR

Efficient control of combustion processes and dehydration plants.

The GM500 Analyzer measures H2O and CO2 concentrations continuously, directly and instantaneously - all in one device. Representative measurement results are supplied by recording the gas concentrations across the entire cross-section of the duct.

Applications:

Power stations and cement plants
Waste incineration plants
Glass industry
Paper and textile industries
Dehydration and humidification plants

iso9001.jpg (10454 bytes)gm500.jpg (15595 bytes)

Advantages:

Non-contact measurements of H2O and CO2 - simultaneously with one device
Low maintenance requirements
All parameters can be interrogated during operation

Technical Specifications:

System components Transmitter, receiver and connection unit
Measuring principle Filter correlation (IR)
Measuring variable/
Measuring range		 H2O: 0 ... 25 to 100 %vol. (depending on the measuring path)
CO2: 0 ... 25 to 100 %vol. (depending on the measuring path)
Interfaces RS 232, RS 422
Enclosure rating IP 65
Test function Automatic check cycle