title-bar.jpg (6912 bytes)
Company ProfileOur ProjectsProducts & ServicesResource CenterWhat's NewOnline Form
Site Map
Contact Information
Back To Home
In-Situ Gas Analysis(6180 bytes)
(6572 bytes)
(6601 bytes)
(6381 bytes)
(5978 bytes)
(6419 bytes)
(6714 bytes)
(6643 bytes)
(6281 bytes)
(6035 bytes)
prodserv12.jpg (1475 bytes)
(6415 bytes)
(6843 bytes)
indexad1.jpg (13643 bytes)

Copyright ©1998-2004:
AMKO Systems Inc.
All rights reserved.

rm210a.jpg (13481 bytes)  

RM 210 DUST CONCENTRATION/SOOT MONITOR

For measuring extremely low dust concentrations in various processes.

The RM210 Dust Concentration Monitor operates according to the scattered-light principle.  Its various depths of measurement allow a representative analysis to be conducted even in large duct diameters.

iso9001.jpg (10454 bytes)rm210.jpg (17449 bytes)

Versions:

RM210 Dust Concentration Monitor
RM210 Soot Number Monitor

Applications:

Ideally suited for monitoring extremely low dust/soot concentrations (e.g. toxic dust limit values)

Steel and cement industry
Asbestos industry
Food industry

Advantages:

Automatic check cycle and contamination measurement
Freely adjustable measuring ranges
No direct contact between measuring device and flue gas
Modem connection provided

Technical Specifications:

System components Transmitter / receiver unit, light absorber and connection unit
Measuring principle Scattered light
Measuring variable Dust concentration, soot number
Measuring range Dust concentration: 0.1µg/m3 to 200mg/m3, soot number: 0-3
Interfaces RS 232, RS 422
Enclosure rating IP 65
Test function Automatic check cycle
Conformities TÜV-approved, TA clear air, 13th and 17th BImSchV