Copyright ©1998-2004:
AMKO Systems Inc.
All rights reserved.
ASI RS-57 THC TECHNICAL SPECIFICATIONS
| Voltage: | 115 VAC 60 Hz | Oven Temperature: | 0 - 200 ° C Adjustable | |
| Power Requirements: | 550 W Heating Phase | Ambient temperature: | 5 - 40° C | |
| 200 W Operating | Ranges: | 0 - 10 ppm Propane | ||
| Inlet Pressures: | Fuel | 45 psi / 3 bar | 0 - 100 ppm Propane | |
| Comp. Air | 45 psi / 3 bar | 0 - 1000 ppm Propane | ||
| Zero Air | 30 psi / 2 bar | 0 - 10,000 ppm Propane | ||
| Cal. Gas | 30 psi / 2 bar | 0 - 100,000 ppm Propane | ||
| Press. Settings: | Fuel | 4.5 psi /0.30 bar | Range Change: | Manual / Automatic |
| Fuel Air | 11.5 psi / 0.80 bar | Calibration: | Manual / Automatic | |
| Sample Gas | 1.4 psi / 0.10 bar | Output: | 0 - 10V 0 or 4 - 20mA |
|
| Hydrogen: | 20 mL/min | Range Recognition: | Relay Contacts | |
| Hydrogen/Helium mixture: | 50 mL/min | 1 - 5V or Optionally | ||
| Compressed Air: | Integrated Internal | 2 - 10mA or 5,6 - 12mA | ||
| Fuel Air Supply | Signal Contacts: | Flame-Out Control | ||
| 300 mL/min | Pre-Alarm (Option) | |||
| Sample Flow: | 200 L/hr | Main-Alarm (Option) | ||
| Zero Gas: | Synthetic Air or Nitrogen | Zero Gas Alarm | ||
| Calibration Gas: | Propane (Recommended) | Calibration Gas Alarm | ||
| Zero-point Drift: | 2% of Smallest Range/Week | Calibration Mode | ||
| Sensitivity Drift: | 2% of Set Calibration Value/Week | Range Display | ||
| Linearity: | 2% of Range | Housing: | Table-top or 19" Rack-mount | |
| Precision: | ± 0.1% of full scale value | Dimensions: (W x H x D) |
540 x 254 x 360 mm | |
| Sensitivity: | 1% of full scale value | Weight: | 20 kg | |
| Response Time (T100): | 1 second | |||